Collection: BMW

AeroBon builds carbon fiber trunk spoilers and mirror caps across nearly the full BMW lineup — from E82/E90-era classics through the current G-series, covering the 3, 4, 5, 6, and 8 Series, the M2/M3/M4, and the X3M, X5, X5M, X6, and X6M. Every piece is molded to its specific chassis generation, using genuine 3K woven carbon fiber finished with a UV-resistant gloss coat.

Why AeroBon

  • Real woven carbon fiber construction, not a carbon-look decal over plastic
  • Chassis-specific molds — an F30 spoiler is not the same part as a G20 spoiler, even though both are "3 Series"
  • You don't need the M Sport package for these to fit — spoilers are designed around the shared trunk lid, not the trim level
  • No-drill adhesive installation with automotive-grade 3M tape on most spoilers
  • Shipped from a US warehouse, with real support if something doesn't fit right

FAQ

What do the chassis codes (E90, F30, G20, and so on) actually mean?
BMW identifies each generation internally by a chassis code rather than just a model year — for example, the 3 Series has been the E90, then F30, then G20 across three generations. Check your BMW's build sheet, door jamb sticker, or VIN lookup if you're not sure which chassis you have, since spoilers are not interchangeable between generations even within the same model name.

Do I need the M Sport package for this to fit?
No. These spoilers are designed around the shared trunk lid for the whole chassis generation, not just M Sport trims.

Will an M3 or M4 spoiler fit my non-M 3 Series or 4 Series?
In most cases yes, since the M3/M4 shares its trunk lid with the standard 3/4 Series of the same chassis (for example, F30 and F80 M3, or G20 and G80 M3). Always check the specific product page to confirm.

Does this fit the wagon or Touring version?
No, unless explicitly stated. These spoilers are molded for the sedan or coupe trunk lid and are not compatible with Touring/wagon body styles.

Is this real carbon fiber?
Yes — genuine woven 3K carbon fiber cloth and resin, not a printed pattern over ABS plastic.

Do I need to drill into my trunk lid?
No. Most AeroBon spoilers use structural 3M adhesive tape for a no-drill install.

Related models

1 & 2 Series

3 & 4 Series

5, 6 & 8 Series

M2, M3 & M4

X Models

}}