Product GuideGR5 Titanium Engine Bay & Body Panel Bolt Kit
AeroBon GR5 titanium bolt kits are CNC-machined from Ti-6Al-4V (Grade 5) titanium and finished with a corrosion-resistant PVD coating, built for clean, consistent installs across engine bay and exterior body panel applications. The wide button head with integrated washer base delivers flush, scratch-free mounting while distributing load more evenly across panels and brackets — ideal for bumpers, fender flares, widebody kits, and trim.
Package includes: 8× M8 x 25mm titanium bolts (24mm head), 4× stainless rivet nuts, 4× stainless nylon lock nuts, 8× rubber spacers, 1× hex L-key, all in a protective case.
Why Choose AeroBon GR5 Titanium Bolt Kits?
- Wide 24mm button head with integrated washer base — flush, scratch-free mounting with maximum surface contact.
- Aerospace-grade GR5 titanium — CNC-machined Ti-6Al-4V for lightweight strength, corrosion resistance, and heat tolerance in high-temp engine bay conditions.
- Flexible mounting system — rivet nuts for blind installs, nylon lock nuts for through-panel fastening; works with bumpers, fender flares, widebody kits, and custom brackets.
Common QuestionsFAQ
Do I need a rivet nut tool to install this kit?
Only if you're using the rivet nuts for a blind install. If your panel is already through-hole, you can mount directly with the included nylon lock nuts — no extra tools required.
Where can I install these bolts?
Common applications include engine bay covers, exterior trim, bumpers, fender flares, widebody kits, and custom brackets with M8 thread points. Always confirm thread size, pitch, and length before installing.
How do I maintain the PVD finish?
Clean with a mild, pH-balanced solution and avoid abrasive cleaners. Re-check torque after heat cycles, especially in engine bay locations.
Let customers speak for us
Beautiful
The media could not be loaded.
I really love it. It was quite the process to get it on. After watching many videos we thought we could do it ourselves but when we took the factory spoiler off, underneath it were a lot of small rivet-like holes along the entire back of the trunk besides the 2 bolt holes on either end that held it on. The videos I watched didn't mention all that. I thought the 2 bolt holes would be covered by the new spoiler but the rivet holes definitely weren't. There was also a lot of adhesive that secured the factory spoiler to the trunk. I used 3M adhesive remover that was safe for cars and got a plastic scraper that was recommended and all I did scratch up the paint. I had enough of this DIY project and brought it to an auto body shop to have them fix the damage I did and install the spoiler. So basically what I'm saying is have this installed professionally.
MaxForm fits good, pretty good quality
Fits and looks great. Decided to use an epoxy glue vs the supplied tape. Just a personal choice.
I had an issue with the original spoiler I got but they were extremely fast at getting back to me on the issue and sending me a replacement. Quality and weave of the carbon fiber is a 10/10. Definitely would recommend if you’re looking for a sleek carbon spoiler for your 10th gen accord !
10/10
Aerobon was kind enough to send me this carbon spoiler for my 2025 Audi S3, and it definitely exceeded my expectations I wasn’t sure how it would look on the car but I couldn’t be happier with how it turned out!
10/10
The spoiler was well packed and arrived in great shape. Instructions were clear and the YouTube videos were VERY helpful.
Nice Fit, Nice Look
10/10
Well packaged, good instructions look great on the cat.
great productfits like a glove
I like it
This carbon wing fits my 2021 Camry perfectly. I have to remove the factory wing to install this one. It comes with some double-sided tape and some pre-drilled holes. Hopefully the tape with suffice, but we'll see.The wing itself has a more aggressive look than the factory wing. The carbon fiber is attractive and shiny. It definitely seems like it will elevate the look of the camry. I already have carbon mirror covers, so this will be a great addition.
Pretty decent set of titanium hardware, really like how they package them separated by foam so the finish doesn't get scratched and worn during transit. The machining is quite nice, the surface isn't the smoothest, but the color gradient is nice and bright. The extra hardware that comes with the kit feels unnecessary, but it's nice having more nylock nuts I guess. I just don't understand including only a few nylocks and rivnuts and then not including a tool for the rivnuts. Just an odd hardware combo, especially if you're someone who's just looking for titanium metric hardware.And I have to say, I've received and bought a lot of titanium hardware recently, and these are by far some of the most expensive per-bolt that I've seen. You could easily find hardware like this for cheaper, but if this set happens to be right for you, go for it. I don't think you'll be disappointed by the hardware, but I am personally disappointed by the price.
Tremendous quality here folks. Got to give props to anyone who can make bolts look exactly the way they do in the advertisement. These bolts have a massive head so double check they will work for your scenario. I appreciate the great case these come in as well…the cherry on top for me.
Excellent quality Titanium (no worries) bolts and accessories. This kit is complete and really complements your engine head. No worries of rust \ corrosion. Seems a bit pricey, but worth every penny.